法国FACOM工具/拉马/Pullers | |
Workshop puller kits车间拉马套装 | |
Light-engineering kit U.JA1 | Light-engineering kit U.301BJ1 |
4-Tonne kit U.J2 | General engineering kit U.102T |
General engineering kit U.JA3 | General engineering kit U.103A |
Outside pullers - 2 legs 2爪拉马 | |
U.232G Spare legs for U.232 pullers | U.232G Spare legs for U.232 pullers |
U.32TGA Spare legs for U.32T | U.14 Self-gripping slim 2-leg pullers |
U.32T Lockable 2-leg sliding-leg puller | U.301 Self-gripping 2 slim-leg puller |
U.232 - 2-leg sliding-leg puller | Spare legs for puller U.302 |
U.301 Self-gripping wide 2-leg puller | U.232V Spare screws for U.232 pullers |
U.35 Wide 2-leg pullers | Puller with yoke U.52 |
Heavy-duty 2-leg pullers U.34 | Pulley puller DM.31 |
U.42 Pullers with yokes | |
Outside pullers - 3 legs 3爪拉马 | |
U.306 outside pullers | Inside/outside puller module MOD.U306PB |
U.306N Inside pullers | U.310 Outside pullers |
Spare legs for puller U.306 | Inside puller U.310-230N |
Inside/outside puller kit U.306J1 | Spare legs for puller U.310 |
Spare screws for puller U.310 | Long-reach outside puller U.20B |
U.302 Self-gripping slim 3-leg pullers | High-capacity outside puller U.27AS3 |
Spare legs for puller U.302 | Set of 3 long legs for U.27AS3 U.27D3 |
Short-reach outside puller U.20 | High-capacity outside puller U.320 |
High-capacity outside puller U.330 | 10 T hydraulic jack for U.312H U.312-01 |
High-capacity outside puller U.60B | Guide tip for U.312H U.312-02 |
10T hydraulic puller set with 4 sets of legs U.312HJ4 | Set of 2 extensions for U.312H U.312-03 |
10T hydraulic puller set with 3 sets of legs U.312HJ3 | 2 or 3-leg body for U.312H U.312-04 |
Centring nut for U.312H U.312-04-01 | 20 T Hydraulic outside puller U.320H |
Set of 3 bolts and 3 nuts for U.312H U.312-04-02 | 30 T hydraulic outside puller U.330H |
Spare legs for puller U.312H | |
Inside pullers 内用拉马 | |
Micro-engineering puller kit U.23J1A | Inside grip puller U.28 |
Light engineering puller kit U.23J2 | Beam for pullers U.28 and U.51B U.30 |
General engineering puller kit U.23J3 | Inside grip puller and beam kit U.28J1 |
Inside grip puller U.51B | U.49P inside grip expansion pullers |
Maintenance puller kit U.49PJ1 | Adapter U.49P U.49BR1 |
Light-engineering puller kit U.49PJ2 | Adapter U.49AD10 U.49AR2 |
Light-engineering puller kit U.49PJ3 | Adaptors for attaching U.301 / U.302 to U.49AM |
Heavy-duty puller set U.49PJ4 | U.23D Pair of tips |
Slide hammers滑锤 | |
Slide hammer U.306M | Slide hammer U.49AM |
Slide hammer U.49L | Slide hammer U.2 |
Separators and beam pullers 分离器和滑锤 | |
60 mm separator and beam puller kit U.53J1 | U.53KL Non-tapped beams |
110 mm separator and beam puller kit U.53J2 | U.53S Beams for use with jacks |
U.53T Separators | U.53RL Spare tie-rods for beams |
U.23K, U.53K tapped beams | U.53E Male adaptors |
U.53H Female adaptors to fit male adaptors | |
Stud extractors - nut splitters 螺栓提取器和螺母劈开器 | |
285.J Set of right-hand thread stud extractors | 286A Knurl-type stud drivers - Multi-diameter |
285 Single right-hand thread stud extractors | 287B Roller-type stud drivers - Single-diameter |
285.F Single cone bits for extractors 285 | Set of roller-type stud drivers 287B.JS5 |
Components for 885 set | 289 Nut splitters |
Set of right-hand or left-hand thread stud extractors 885 | Set of 2 nut-splitters for sizes M2 to M8 and M10 to M16 -289 |
更多产品信息及专业技术咨询 | |
热线:4000-343-885 | |
邮箱:Nahe001@hinahe.com |